Szerszámrezgés diagnosztika intelligens szerszámtartó alkalmazásával
Tool Vibration Diagnostics Using an Intelligent Toolholder
Keywords:
intelligent toolholder, MEMS sensors, Schunk iTENDO2, chatter diagnostics, /, intelligens szerszámtartó, MEMS szenzorok, Schunk iTENDO2, rezgésdiagnosztikaAbstract
This study presents the vibration-diagnostic capabilities of the Schunk iTENDO2 intelligent toolholder and its impact on process monitoring and optimisation. Four case studies were conducted to evaluate its performance. Our findings show that the sensor integrated into the iTENDO2 toolholder enables low-noise, high-resolution vibration measurements, which support the generation of more accurate stability diagrams and the development of robust tool-condition monitoring algorithms.
Kivonat
A jelen tanulmány a Schunk iTENDO2 intelligens szerszámtartó rezgésdiagnosztikai képességeit és a megmunkálás felügyeletre és optimalizálásra gyakorolt hatását mutatja be. Négy esettanulmányon keresztül végeztünk kísérleteket. Az eredmények igazolták, hogy az iTENDO2 szerszámtartóba integrált szenzora zajmentes, nagy felbontású rezgésmérést tesz lehetővé, ami pontosabb stabilitási diagramok és robusztus szerszámfelügyeleti algoritmusok kialakításához vezet.
References
Bártfai A. and Dombóvári Z., ‘Hangolható asztal optimális hangolásának kísérleti ellenőrzése és kompatibilis munkadarab tervezése’, Gép, vol. 75, no. 3–4, pp. 19–22, 2024, doi: 10.70750/GEP.2024.3-4.4.
M. Li, W. Zhao, L. Li, N. He, and G. Stepan, ‘Influence of milling stability on machined surface integrity and fatigue performance of Ti-6Al-4V titanium alloy’, Eng. Fail. Anal., vol. 168, p. 109103, Feb. 2025, doi:
10.1016/j.engfailanal.2024.109103.
Y. Altintas and M. Weck, ‘Chatter Stability of Metal Cutting and Grinding’, CIRP Ann., vol. 53, no. 2, pp. 619–642, Jan. 2004, doi: 10.1016/S0007-8506(07)60032-8.
C. Yue, H. Gao, X. Liu, S. Y. Liang, and L. Wang, ‘A review of chatter vibration research in milling’, Chin. J. Aeronaut., vol. 32, no. 2, pp. 215–242, Feb. 2019, doi: 10.1016/j.cja.2018.11.007.
D. Hajdu et al., ‘Stable tongues induced by milling tool runout’, Int. J. Mach. Tools Manuf., vol. 206, p. 104258, Mar. 2025, doi: 10.1016/j.ijmachtools.2025.104258.
X. Wei, E. Miao, and H. Ye, ‘Analytical Prediction of Three Dimensional Chatter Stability Considering Multiple Parameters in Milling’, Int. J. Precis. Eng. Manuf., vol. 23, no. 7, pp. 711–720, Jul. 2022, doi: 10.1007/s12541-022-
00645-y.
Z. Qin, S. Jiang, S. Yin, Y. Sun, and M. Wang, ‘Chatter stability prediction methods in the machining processes: a review’, Int. J. Adv. Manuf. Technol., vol. 136, no. 7, pp. 2945–2985, Feb. 2025, doi: 10.1007/s00170-024-14971-0.
M. Sanz-Calle, A. Iglesias, L. N. L. de Lacalle, Z. Dombovari, and J. Munoa, ‘Optimal milling cutter helix selection for period doubling chatter suppression’, Int. J. Mach. Tools Manuf., vol. 202, p. 104211, Nov. 2024, doi:
10.1016/j.ijmachtools.2024.104211.
C. Song, Z. Peng, D. Zhao, and X. Jin, ‘A whole discretization method for milling stability prediction considering the discrete vibration velocities’, J. Sound Vib., vol. 553, p. 117687, Jun. 2023, doi: 10.1016/j.jsv.2023.117687.
M. Gil-Inchaurza, X. Beudaert, J. A. Sanchez, J. Munoa, and Z. Dombovari, ‘Topography lobes diagram applied to identify waviness features induced by a single-frequency tool vibration in turning’, J. Mater. Process. Technol., vol.
345, p. 119041, Nov. 2025, doi: 10.1016/j.jmatprotec.2025.119041.
B. Jia, ‘Two-dimensional tool tip vibration measurement method with mirror optical fiber bundles in milling machines’, J. Mech. Sci. Technol., vol. 36, no. 5, pp. 2189–2200, May 2022, doi: 10.1007/s12206-022-0403-4.
J. Lei, S. Mei, Q. Zhao, W. Qiu, L. Wan, and G. Wen, ‘At-dicnet: a novel framework based speckle pattern for non-contact micron-level tool vibration deformation precision measurement’, J. Intell. Manuf., Nov. 2025, doi:10.1007/s10845-025-02723-0.
X. Tao, Y. Zhao, and Y. Chen, ‘Vibration monitoring and health status recognition technology of machine tool electric spindle’, J. Eng. Appl. Sci., vol. 72, no. 1, p. 102, Jul. 2025, doi: 10.1186/s44147-025-00672-2.
H. Zhang, D. Anders, M. Löser, S. Ihlenfeldt, J. Czarske, and R. Kuschmierz, ‘Non-contact, bi-directional tool tip vibration measurement in CNC milling machines with a single optical sensor’, Mech. Syst. Signal Process., vol. 139,
p. 106647, May 2020, doi: 10.1016/j.ymssp.2020.106647.
M. Ntemi, S. Paraschos, A. Karakostas, I. Gialampoukidis, S. Vrochidis, and I. Kompatsiaris, ‘Infrastructure monitoring and quality diagnosis in CNC machining: A review’, CIRP J. Manuf. Sci. Technol., vol. 38, pp. 631–649,
Aug. 2022, doi: 10.1016/j.cirpj.2022.06.001.
L. Martiri, P. Esmaili, and L. Cristaldi, ‘A Convolutional Neural Network for CNC Milling Machines Processes Classification’, in 2024 IEEE International Conference on Metrology for eXtended Reality, Artificial Intelligence and Neural Engineering (MetroXRAINE), 2024, pp. 634–639. doi: 10.1109/MetroXRAINE62247.2024.10796343.
M. F. Siddique, W. Zaman, M. Umar, J.-Y. Kim, and J.-M. Kim, ‘A Hybrid Deep Learning Framework for Fault Diagnosis in Milling Machines’, Sensors, vol. 25, no. 18, p. 5866, Jan. 2025, doi: 10.3390/s25185866.
C.-Y. Li et al., ‘Design and Development of a Low-Power Wireless MEMS Lead-Free Piezoelectric Accelerometer System’, IEEE Trans. Instrum. Meas., vol. 72, pp. 1–11, 2023, doi: 10.1109/TIM.2023.3242016.
B. Mota, P. Faria, C. Ramos, and Z. Vale, ‘Review of manufacturing integration between production, maintenance and quality artificial intelligence systems’, J. Ind. Inf. Integr., vol. 47, p. 100910, Sep. 2025, doi: 10.1016/j.jii.2025.100910.
F. Bleicher, C. M. Ramsauer, R. Oswald, N. Leder, and P. Schoerghofer, ‘Method for determining edge chipping in milling based on tool holder vibration measurements’, CIRP Ann., vol. 69, no. 1, pp. 101–104, Jan. 2020, doi: 10.1016/j.cirp.2020.04.100.
F. Bleicher et al., ‘Tooling systems with integrated sensors enabling data based process optimization’, J. Mach. Eng., vol. 21, no. 1, pp. 5–21, Mar. 2021, doi: 10.36897/jme/134244.
P. Stavropoulos, D. Manitaras, C. Papaioannou, T. Souflas, and H. Bikas, ‘Development of a Sensor Integrated Machining Vice Towards a Non-invasive Milling Monitoring System’, in Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus, K.-Y. Kim, L. Monplaisir, and J. Rickli, Eds, Cham: Springer International Publishing, 2023, pp. 29–37. doi: 10.1007/978-3-031-18326-3_3.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Nemzetközi Gépészeti Konferencia – OGÉT
This work is licensed under a Creative Commons Attribution 4.0 International License.
