Mikromarási folyamat dinamikai hatásainak elemzése

Analysis of dynamic effects in micro milling process

Authors

  • Barnabás Zoltán BALÁZS
  • Juvenal R. RESÉNDIZ
  • Márton TAKÁCS

Keywords:

mikromarás, FFT analízis, CWT analízis, domináns frekvencia, öngerjesztett rezgés

Abstract

Micro milling is the most flexible and fastest way to machine miniature structures prepared of different kind of materials. This method is actually the transportation of conventional sized milling into the range of 0-999 microns. Micro milling is characterized by relative large dynamic effects, which have impacts on the machining quality and accuracy. Main aim of this research work is mapping and understanding of these effects, and hence the active increasing the stability of the process. Systematic series of experiments were carried out in order to analyse the cutting forces and vibrations. Dominant frequencies were determined, and phenomenon of chatter was investigated. 

Kivonat

A mikromarás különböző anyagú, miniatűr struktúrák megmunkálásnak az egyik legrugalmasabb és leggyorsabb módja. Az eljárás valójában a hagyományos méretű marás 0-999 µm-es mérettartományba történő átültetése. A mikromarást viszonylag jelentős dinamikai hatások jellemzik, amik befolyásolják a megmunkálási minőséget és pontosságot is. A kutatás célja ezeknek a hatásoknak a részletes feltérképezése, megértése, ezek által is a folyamat stabilitásának a tudatos növelése. A forgácsolási erők és a rezgések elemzése céljából szisztematikus kísérletsorozat végeztünk C45-ös anyagon. Meghatároztuk a domináns frekvenciákat, valamint megvizsgáltuk az öngerjesztett rezgés jelenségét.

References

A. Mamedov, S. E. Layegh K., and I. Lazoglu, Machining Forces and Tool Deflections in Micro Milling, Procedia CIRP, vol. 8, pp. 147–151, 2013.

Jauregui J.C., Resendiz J.R., Thenozhi S., Szalay T., Jacso A., Takacs M., Frequency and Time-Frequency Analysis of Cutting Force and Vibration Signals for Tool Condition Monitoring. IEEE Access. 2018;6:6400–6410. doi: 10.1109/ACCESS.2018.2797003

Downloads

Published

2020-04-16

Issue

Section

A. szekció - Anyagtudomány és technológia